Skin Warranty: faults, wear and application
Last updated: 16 November 2026
Our skins are self-adhesive vinyl wraps, precision-cut for the device model you order and applied by you. This page explains the difference between a fault, normal wear and damage caused during application, and what to do if something goes wrong.
This page is about skins. Screen protectors are covered by your legal rights as set out in our Terms and Conditions. Please read this page together with those Terms and Conditions: it gives more detail for skins and does not change them.
This page does not reduce your legal rights and is not an extra guarantee on top of them. It explains how we apply those rights to skins.
1. About our skins
1.1 We are a small family business. Every skin template is designed and tested on the actual device it is made for, so that the cut-outs line up with the cameras, buttons, ports and edges of that model.
1.2 Skins are applied by hand, by you. A good result depends on choosing the right model, preparing the surface properly and following the application tutorial for your device on our How to apply page.
2. Your legal rights
2.1 Under the Consumer Rights Act 2015, our skins must be of satisfactory quality, fit for purpose, as described and match the model you ordered. A skin must also last a reasonable time, taking into account its price, how it is used and how it is looked after.
2.2 These rights do not promise that a skin will never show wear. They protect you against faults that were there when the skin was delivered, including faults in the material or adhesive that only show up later.
2.3 Applying a skin does not by itself end your rights. If a skin turns out to be faulty after you have applied it, we will still assess it fairly.
3. Check your order before applying
Before you start, please:
- check the model: make sure the skin is for your exact device model (you can find this in your device’s settings or on the back of the device), and that the cut-outs match your device;
- check for damage: look at the skin on its backing sheet for printing defects, creases, tears or anything else that looks wrong; and
- watch the tutorial: watch the application video for your device on our How to apply page before you peel anything off.
If anything is wrong, stop and contact us before applying. It is much easier for us to put things right with a skin that has not been applied, and it avoids any argument about whether a problem was caused during application.
4. What counts as a fault
Examples of problems we treat as faults:
- wrong model cut: the skin was cut for a different model from the one you ordered;
- cut-outs that don’t match: the cut-outs do not match the model you ordered (for example a camera or button opening in the wrong place);
- printing defects: faded, smudged or incorrect printing compared with the product description;
- material damaged before delivery: creases, tears or other damage that was there when the skin arrived; and
- adhesive that does not work: the adhesive does not stick, even though the surface was prepared and the skin applied as shown in our tutorial.
This list gives examples and is not complete. A defect that only becomes visible after application (for example a problem with the material or adhesive) is still assessed fairly. Losing grip or fading after a period of use is not automatically treated as normal wear: we look at how long and how the skin has been used, and whether the material or adhesive was defective.
5. What does not count as a fault (unless it was caused by a defect)
The problems below are not faults, unless they were caused by a defect in the skin or by unclear or incomplete instructions from us. If the skin was faulty or our instructions were inadequate, your rights still apply.
5.1 Damage caused during application
- tearing or overstretching the skin;
- misalignment (applying the skin off-centre or crooked);
- dust, hair, fluff or air bubbles trapped under the skin because the surface was not properly cleaned or the skin was not applied as shown in the tutorial;
- damage from removing and re-applying the skin repeatedly;
- using heat guns or other high heat sources; and
- applying or using the skin in extreme temperatures.
5.2 Device issues
- the skin is for a different model from your device, because the wrong model was ordered;
- applying the skin over a screen protector, case, another skin, stickers or adhesive residue; and
- applying the skin to a device that is damaged, has been repaired with non-original parts, or has been modified, or that has a worn, peeling or non-original finish. This can also cause damage to the device’s finish when the skin is removed.
5.3 Normal wear and external damage
- scratches, scuffs and marks from everyday use;
- wear on edges and corners, for example from rubbing in a pocket or bag;
- changes caused by sweat, skin oils, dirt or sunlight;
- damage from cleaning products, solvents or alcohol;
- damage from cases, covers, stands, keyboards and other accessories; and
- damage from drops, knocks or other accidents.
5.4 Small dimensional differences
Vinyl stretches or contracts slightly with temperature and handling. Variations of around 1 mm are within normal tolerance and are not a fault. Small differences between the colours you see on your screen and the printed skin are also normal. A skin that does not fit the model you ordered, or does not match its description, is a fault (see section 4).
6. Applied skins and your right to cancel
6.1 You can cancel your order within 14 days, starting the day after you receive it, without giving a reason, as explained in section 12 of our Terms and Conditions. You pay the cost of returning the item unless it is faulty or we sent you the wrong item.
6.2 You can check a skin on its backing sheet against your device. Peeling it off the backing sheet or applying it goes beyond what is needed to inspect it. An applied skin cannot be re-applied or resold, so if you cancel after applying a skin that is not faulty, we may reduce your refund by up to the full price of that skin, to reflect its loss in value.
6.3 This reduction does not apply if the skin is faulty, not as described or the wrong item. In that case, sections 7 and 8 below apply.
7. How to report a problem
7.1 Email [email protected] with:
- your order number;
- your device model;
- a short description of the problem and when you noticed it; and
- clear photos of the affected area (and, if you can, one showing the whole device).
7.2 Photos help us assess the problem quickly, and in many cases we can sort things out from photos alone. We may ask for more photos or information, or ask you to return the skin so that we can inspect it.
7.3 Please do not return anything before we have given you instructions. We will tell you where to send it and, if the skin is faulty or we sent the wrong item, we will cover the reasonable cost of returning it.
8. How we resolve faults
8.1 Within 30 days of delivery: you can reject a faulty skin and get a full refund (including the delivery charge if you reject the whole order), or ask for a replacement instead.
8.2 After 30 days: we will offer a replacement first, because vinyl skins cannot be repaired. If a replacement is impossible, the replacement is also faulty, or we cannot replace it within a reasonable time or without significant inconvenience to you, you can choose a refund or a price reduction. If you choose a refund more than 6 months after delivery, we may reduce it to reflect the use you have had from the skin.
8.3 The 6-month rule: if a fault appears within 6 months of delivery, it is presumed to have been there when the skin was delivered, unless we can show otherwise (for example, clear evidence that the damage was caused during application or by external damage), or the presumption does not fit the nature of the skin or the fault.
8.4 After 6 months: it is up to you to show that the fault was there when the skin was delivered, for example with photos and an explanation of what happened. We will look at the evidence fairly.
8.5 We will make any refund within 14 days of agreeing that you are entitled to it. These are the same remedies as in section 13 of our Terms and Conditions.
8.6 Goodwill: if a skin is not faulty, we may still offer a discount or a replacement as a goodwill gesture. This is entirely at our discretion and does not mean we accept that the skin was faulty.
9. Our liability
9.1 We are responsible for foreseeable loss or damage caused by our breach of contract or our failure to use reasonable care and skill. We are not responsible for damage caused by applying or removing a skin other than in line with our instructions, or by the device issues, wear or external damage described in section 5, unless it was caused by a fault in our product or by unclear or incomplete instructions from us.
9.2 Nothing on this page limits or excludes our liability for death or personal injury caused by our negligence, for fraud or fraudulent misrepresentation, or for anything else that cannot legally be limited or excluded, including your statutory rights. Section 15 of our Terms and Conditions sets out our liability in full.
10. Contact us
If you have a question or a problem with a skin, email [email protected]. We aim to reply within 2 working days.
ULTRAskins is a trading name of Ultra X Ltd, registered in England and Wales, company number 14614288. Registered office: 32 City View, Kirk Beston Close, Leeds, LS11 8TL, United Kingdom.
